Welcome to this website!
  • neye

News

  • Lock out tag out-Steel mill risks

    Lock out tag out-Steel mill risks

    1. Do not wear safety belt when working at height On April 25, an inspection found that the construction workers of Shandong Metallurgical Design Institute Co., Ltd. climbed down to the bottom of the rainwater collection pond scaffold from the material yard of Zhongjin Construction Project in Yul...
    Read more
  • Lockout tag-The air in the generator is replaced with hydrogen

    Lockout tag-The air in the generator is replaced with hydrogen

    I. Preparations are as follows: Steam turbine sealing oil system and lubricating oil system are put into operation, and the turning device is in a static or rotating state. Contact maintenance personnel to prepare about 60 bottles of carbon dioxide and transport them to the bus bar. Contact chemi...
    Read more
  • Henan rescue-Lockout tagout

    Henan rescue-Lockout tagout

    Zhongzhao village is located in a low-lying area, which is prone to severe flooding when it rains. This time, severe floods occurred due to the infrequent heavy rainfall, which damaged roads, houses, communications and other infrastructure in the village and led to disruption, directly affecting ...
    Read more
  • Rectification operation violation behavior

    Rectification operation violation behavior

    Hine law For every serious accident, there are 29 minor accidents, 300 near-misses and 1,000 potential accidents. According to the statistical analysis of the accident, there are few objective factors, few equipment factors, and most of them are human factors: there are paralysis and fluke mental...
    Read more
  • Lockout Tagout validation pilot work

    Lockout Tagout validation pilot work

    In order to put an end to the unsafe factors of people, starting from the concept of essential safety and effectively preventing injuries caused by operators’ misoperations, copper Branch took power workshop as a pilot to carry out the implementation of energy isolation “Lockout tagou...
    Read more
  • Standard LOTO steps

    Standard LOTO steps

    Step1 – Prepare for Shutdown 1. Know the problem. What needs fixing? What dangerous energy sources are involved? Are there equipment specific procedures? 2. Plan to notify all affected employees, review LOTO program files, locate all energy lock-in points, and prepare appropriate tools and ...
    Read more
  • Lockout tagout – Article 10 HSE prohibition

    Lockout tagout – Article 10 HSE prohibition

    Article 10 HSE prohibition: Work safety ban It is strictly prohibited to operate without authorization in violation of the operation rules. It is strictly prohibited to confirm and endorse the operation without going to the site. It is strictly forbidden to command others to do risky operations i...
    Read more
  • Construction operation management

    Construction operation management

    “Construction operation Management” is mainly problem-oriented and focuses on controlling risks in direct operation links. Thirteen management requirements are formulated. In view of the high-risk characteristics of on-site double-sided operation, the depth of prefabrication is improv...
    Read more
  • Coal mill system hidden trouble screening standards

    Coal mill system hidden trouble screening standards

    1. Safety facilities management of coal mill system The coal mill, coal powder bin, dust collector and other places of the coal powder preparation system are equipped with explosion relief valves; There are temperature monitoring devices at the entrance and exit of the coal mill, temperature and ...
    Read more
  • Preheater hidden trouble detection criteria

    Preheater hidden trouble detection criteria

    1. Preheater (including calciner) running The preheater platform, components and guardrail should be complete and firm. Air gun and other pneumatic components, pressure vessels work normally, and the flap valve should have a reliable locking device. The preheater manhole door and cleaning hole co...
    Read more
  • Preheater hidden trouble detection criteria

    Preheater hidden trouble detection criteria

    Preheater hidden trouble detection criteria 1. Preheater (including calciner) running Preheater platform, components and guardrail should be complete and firm. Air gun and other pneumatic components, pressure vessels work normally, the flap valve should have reliable locking device. Preheater man...
    Read more
  • Inspection standard for hidden danger of rotary kiln system

    Inspection standard for hidden danger of rotary kiln system

    Inspection standard for hidden danger of rotary kiln system 1. Rotary kiln operation Observation door (cover) of rotary kiln head is intact, platform guardrail and sealing device are intact without falling off. The rotary kiln barrel body has no obstruction and collision objects, the manhole door...
    Read more