Welcome to this website!

Company News

  • Lockout tagout Harm isolation

    Lockout tagout Harm isolation

    Mechanical/physical hazard isolation The LTCT standard provides a flow chart of how to safely isolate different types of mechanical/physical hazards. Where guidance flowcharts cannot be used, risk analysis must be completed to determine the best safe isolation method. Isolation of electrical haza...
    Read more
  • LOTO-Identify energy hazards

    LOTO-Identify energy hazards

    Identify energy hazards 1. Once a repair or cleaning task has been identified, the main authorizer must identify the hazardous energy that must be eliminated in order to ensure that the work is done safely. 2. If there are procedures in place for a specific job, the primary authorizer reviews the...
    Read more
  • Lockout/ Tagout Case Study – Robot Arm murder incident

    Lockout/ Tagout Case Study – Robot Arm murder incident

    Lockout/ Tagout Case Study – Robot Arm murder incident Robot arms are widely used in auto parts manufacturing plants. They are usually housed in enclosures. Suspended parts are transferred from one site to another in a production location by rotating tables while the parts are lubricated an...
    Read more
  • Protective Stop-LOTO

    Protective Stop-LOTO

    Protective stop No interlock protection outage: in dangerous equipment, equipment without two or more kinds of safety protection devices must be outage! These devices ensure that our body parts will not contact the dangerous parts of the equipment, so the installation must be standardized, it is ...
    Read more
  • Prevention of mechanical injury accidents

    Prevention of mechanical injury accidents

    Prevention of mechanical injury accidents To prevent mechanical injury accident, mainly from the following several aspects: 1 with intrinsically safe intrinsically safe machinery equipment is equipped with automatic detection device, in a human body in a dangerous part of the machinery and equip...
    Read more
  • Environment narrow hide sinister, have no measure to provoke trouble end

    Environment narrow hide sinister, have no measure to provoke trouble end

    Environment narrow hide sinister, have no measure to provoke trouble end In mechanical operation, all kinds of mechanical equipment have a certain safe working space, the placement between mechanical equipment can not be too close, otherwise, when a machine works, its dangerous workpiece and othe...
    Read more
  • Energy isolation in acetylene workshop

    Energy isolation in acetylene workshop

    In order to ensure the operability of the energy isolation program, the implementation program consists of two stages: self-inspection and self-modification and consolidation and promotion. In the stage of self-inspection and self-reform, each party group shall improve the energy isolation ledger...
    Read more
  • Lockout/ Tagout

    Lockout/ Tagout

    Lockout tagout is a common energy isolation method designed to prevent physical injury caused by uncontrolled dangerous energy. Prevent accidental opening of equipment; Ensure that the device is turned off. Lock: Isolate and lock the closed energy sources according to certain procedures to ensure...
    Read more
  • Energy isolation

    Energy isolation

    Energy isolation To avoid accidental release of hazardous energy or materials stored in equipment, facilities or system areas, all hazardous energy and material isolation facilities should be energy isolation, Lockout tagout and test isolation effect. Energy isolation refers to the isolation of p...
    Read more
  • Open line. – Energy isolation

    Open line. – Energy isolation

    Open line. – Energy isolation Article 1 These provisions are formulated for the purpose of strengthening energy isolation management and preventing personal injury or property loss caused by accidental release of energy. Article 2 These provisions shall apply to CNPC Guangxi Petrochemical C...
    Read more
  • Mechanical damage

    Mechanical damage

    Mechanical damage I. The course of the accident On May 5, 2017, a hydrocracking unit normally started p-1106 /B pump, intermittent external transportation of LIQUEFIED petroleum gas. During the start process, it was found that the pump seal leakage (inlet pressure 0.8mpa, outlet pressure 1.6mpa, ...
    Read more
  • Energy isolation “work requirements

    Energy isolation “work requirements

    Energy isolation “work requirements “Most accidents in chemical enterprises are related to the accidental release of energy or materials. Therefore, in daily inspection and maintenance operations, the requirements of the company must be strictly followed to avoid accidental release of...
    Read more
12345 Next > >> Page 1 / 5