Company News
-
Type of safety protection device
Type of safety protection device Interlocking device: such as movable safety door, interlocking switch, etc. 4. A fastening device, such as a fence or protective cover; Pull back device: if tied to the hand, press down, linkage will pull the hand away from the danger zone; Adjustable safety prote...Read more -
Prevention of mechanical hand injuries
Prevention of mechanical hand injuries It is mainly divided into the following aspects: Safety facilities; Cleaning machinery and equipment; Safety protection; Lockout tagout. Why do mechanical injuries occur Failure to comply with standard operating instructions; Exposure of hands to risks whe...Read more -
Process isolation procedures — Isolation identification and assurance
Process isolation procedures — Isolation identification and assurance 1 A numbered plastic label and padlock (if used) shall be attached to each isolation point. When padlocks are used for isolation, the key to the padlock should be managed by the licensor. Isolation should be secure to avo...Read more -
Process isolation procedures – Definitions
Process isolation procedures – Definitions Long-term isolation – Isolation that persists after the operation permit has been cancelled and is recorded as “long-term isolation”. Absolute process isolation: Disconnect equipment to be isolated from all potential hazard source...Read more -
Lock out tag out- Isolation method (key)
Isolation method: disassemble/disassemble Open the switch Add boards Shut off the valve Isolation method (key) Electrical isolation shall be in the main power supply; Pipeline isolation is best used plug plate, double valve plus valve emptying can also, generally can not be isolated with a single...Read more -
Lock out tag out-Key points of energy isolation
Accident Case 1 When the contractor’s employee was dismantling the pipe downstream of the fire hose manifold 1 ball valve (there is still pressure upstream of the ball valve), the ball valve body was accidentally disassembled. The steel ball inside the valve body was rushed out by the fire ...Read more -
What should Lockout Tagout LOTO training include?
What should Lockout Tagout LOTO training include? Training shall be divided into training of authorized personnel and training of affected personnel. Training for authorized personnel should include an introduction to Lockout Tagout definition, a review of the company’s LOTO procedures, and...Read more -
Is Lockout tagout LOTO required by law?
Is Lockout tagout LOTO required by law? In China, there is no federal regulation issued like OSHA1910.147, but the requirement for Lockout tagout LOTO is clearly stated in many Chinese administrative regulations and national standards. Different regulations and standards involve provisions simila...Read more -
We will strengthen work safety
We will strengthen work safety At present, the situation of production safety is grim and complex. The production organization, equipment inspection and maintenance, personnel use and other aspects of all manufacturing departments and departments are different from normal ones, which indeed incre...Read more -
Inspection and maintenance work safety management
Inspection and maintenance work safety management In order to do a good job in the safety management of inspection and maintenance operations of the company, implement relevant national safety laws and regulations, standards and specifications, standardize the energy locking procedures of mainten...Read more -
Energy Isolating Device
Tagout is the process by which an energy-isolating device used for lockout is placed in the off or safe position and a written warning is attached to the device or placed in the area immediately adjacent to the device. The tag must identify the person who applied it and be durable and able to wit...Read more -
Thinking and discussion on safe production
Thinking and discussion on safe production At 12:20 PM on November 30, 2017, a petrochemical company refinery workshop ii of 1.5 million tons/year heavy oil catalytic cracking unit slurry steam generator E2208-2 during maintenance, in the process of dismantling the equipment head bundle jumped ou...Read more