Here’s another example of a lockout tagout case:A maintenance technician is tasked with repairing an industrial machine used for cutting metal sheets. Before performing any maintenance work on the machine, the technician must follow the lockout tagout procedures to ensure their safety.The technician will start by identifying all the energy sources that supply power to the machine, including electricity, hydraulics, and pneumatics. The technician will then proceed to isolate these energy sources and make sure that the machine cannot be re-activated during maintenance work.The technician will use a lockout device like a padlock to secure all the switches and control valves associated with the machine’s energy sources, ensuring that these sources cannot be turned on. The technician must also attach a tag to the lockout device indicating that maintenance work is being performed on the machine, and the energy sources must remain locked out.During the maintenance work, the technician needs to ensure that the lockout tagout devices remain in place and that nobody attempts to remove them or re-activate the energy sources. The technician must also remove any stored energy in the machine, like releasing any pressure in hydraulic or pneumatic lines.After the maintenance work is complete, the technician will remove all the lockout tagout devices and restore the power to the machine. Before using the machine again, the technician will test it to make sure it’s in proper working order and meets all safety standards.This lockout tagout case ensures that the maintenance technician is safe while performing maintenance on the machine, preventing any accidental re-energization that could present significant safety risks.
Post time: May-20-2023