Hot New Products Electrical Lockout Kit - Lockey Transparent Switch Push Button SBL01-D22 – Lockey

Emergency Stop Button Lockout SBL01-D22

a) Made from durable transparent PC.

b) Fit on press or screw emergency stop button.

c) Easily used and permanently prevent workers from operating carelessly.

d) For the hole diameter of 22-30mm.

Project Details

Categories:

Electrical & Pneumatic Lockout

Locking of electrical equipment

Personal lock of electrical equipment.

When conducting electrical equipment maintenance, the electrical equipment operator shall Lockout and tagout. When power failure is required for maintenance of other equipment, the electrical equipment involved shall be Lockout and tagout by the electrical equipment operator, but the key shall be locked into the local collective lock box.

Lock the electrical equipment collectively.

When using the collective locking mode, put the key into the collective locking box, and the electrical equipment maintenance personnel lock the collective locking box. If the electrical switch cabinet does not have the locking condition, the key of the switch cabinet can be regarded as the collective lock key and locked into the collective lock box. The warning sign is hung on the door of the switch cabinet.

Isolation instructions for electrical equipment.

The main power switch is the main lock point of the electrical drive equipment, and the auxiliary control equipment such as field start/stop switch is not the lock point. If the voltage is lower than 220V and the power supply is connected by a plug, the plug can be effectively isolated by unplugging. If the plug is not in the line of sight of the staff, the plug must be Lockout or tagout. If the loop is powered by fuse/relay control panel and cannot be locked, the fuse must be removed and the “dangerous/do not operate” sign must be hung.